Reverse Osmosis Drinking Water System
Using the latest technology in Reverse Osmosis (RO), this Puretec filter tap with dual filter provides purified, clean, and high-quality drinking water. The ultra-fine membrane allows only water molecules to pass through, leaving behind a majority of impurities.
Reverse osmosis drinking water systems effectively eliminate 98% of all dissolved impurities, heavy metals, salts, viruses, bacteria, cysts, fluoride, nitrate, chlorine, taste, odour, and chemicals. This RO270 comes with a simple installation kit including a holding tank.
Pure, Safe Water at Your Fingertips
- HIGH-PURITY WATER - Provides fresh-tasting and clean water, with its 0.0005 micron rating for 98% removal of impurities
- EFFECTIVE - Reverse osmosis technology is the most advanced and highly effective purification process—where water passes through sediment (MC051) and carbon (CB951) filters to remove large particles, and is then pressurised through an ultra-fine membrane (RET1812-75) that allows only water molecules to pass through
- FUNCTIONAL - The long-reach faucet has a ¼” turn ceramic disc, and is useful for larger or deeper sinks, making it easier to fill or clean larger pots, pans, and containers
- CONVENIENT - No power required to operate the system; the simple installation kit includes a holding tank that when full, the RO270 system's valve shuts off to stop producing water
- LOW COST - Gives you water of guaranteed quality for less than 2 cents per litre per day
RO270 Kit Inclusions
- RO system, plumbing kit, auto shut-off valve
- 7-litre storage tank
- Long reach faucet
- Membrane
- Cartridges
- Spanner wrench
- Drain clamp
- Pressure hammer/flow/non-return valve
Watermark and WELS Registration: The Australian Standard AS/NZS 6400:2005 2.6.1 indicates that the standard does not apply to tapware that is part of an appliance such as dedicated filter taps.
Specifications
- Model: RO270
- Maximum Flow: 270 litres per day
- Capacity: 8,000 L
- Micron Rating: 0.0005
- Stage 1 Filtration: MC051
- Stage 2 Filtration: CB951
- Stage 3 Filtration: RET1812-75
- Min/Max Temperature: 0 - 30°C
- Min/Max Pressure: 300 - 875* kPa
- Maximum Inlet TDS: 2,000 mg/L
- Maximum Hardness: 171 mg/L - (10 grain)
- Maximum Silt Density Index: 5
- Connection: 13 mm ½” Compression Tee
- Required Tap Hole: 13 mm diameter
- Important Note: *Where line pressure exceeds 500 kPa, an approved pressure limiting device must be installed to comply with Australian & New Zealand Plumbing Standards. (Ref. AS/NZS 3500.1:2021, Clause 3.3.4). Use only genuine Puretec replacement cartridge.
Dimensions

Warranty
3 years replacement parts. 1 year parts and labour.
Australian Dollar